|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
|
|
||||||
|
Compatible Device |
Oculus Quest 1/ Quest 2/Rift/Rift S/GO/HTC Vive/Vive Pro/Valve Index |
Oculus Quest 2 / Oculus Quest |
Oculus Quest 2 |
Oculus Quest 2 |
Oculus Quest 2 / Oculus Quest |
Oculus Quest 1/2 |
|
Package Weight |
510g |
170g |
100g |
63g |
280g |
33g |
|
Material |
ABS Plastic |
PVC, Copper, Aluminum |
Metal, PU, Silicone |
Silicone |
PVC, Copper, Aluminum |
PU, Velcro |
Patent Design
Noise-free, one-piece design for product integrity, professionalism and aesthetics.
360° rotations
Cable length: 70 inch = 1.8m
Decibels < 30db
Over 30000 Times Stretch Life
The Quietest VR Pulley System
Simpler yet smarter design to give you more immersive VR experience
Compatibility:
HTC Vive, HTC Vive Pro;
Oculus Quest 2, Oculus Quest 1, Oculus Rift, Oculus Rift S Link Cable;
Playstation VR, Microsoft MR, Valve Index, Samsung Odyssey VR, and other wired virtual reality headsets.
KIWI design Pro Version VR Cable Management (V2)-Super quiet pulley system
Tips for use:
1. I found the pull tension too much.
You can adjust the cable length with the L wrench to have a comfortable pull strength(you may have to try few times)
2. How to install the ring hook?
Please note that the 3 pulleys should make an equilateral triangle. You can position the center point for the ring kook, then from this center, fix the positions of the pulleys, the angle between each should be 120 degrees, the radius can be 50-150cm according to the size of your room.
3. What if I want more adhesive pads.
KIWI design provides always 2 extra pads in the package, but if you need more, they are just regular pads, you can just buy from other stores.
4. I have a fairly small play space. Could I use just one of these?
If you have a small room, you may not need the whole package of pulleys, one or two pulleys can work, it depends on you.
5. How to avoid damaging the ceiling when removing the adhesive pads?
The adhesive pads were strong to make sure they hold the pulleys, you can heat the pad with a hairdryer and remove the pad slowly, or you can stick a layer of transparent tape on the surface of the ceiling before fixing the adhesive pads, the transparent tape normally doesn’t damage the surface.
Different Product Design
|
|
|
|
|---|---|---|
|
Silent Unibody Design Simplify the system from integrated design of the top loop and pulley body to 360° rotations function integrated inside the HMD cable holder, providing product integrity, professionalism and aesthetics. |
Cable Length Adjuster Pull up the Noise Dampener and use the Allen wrench on the Cable Length Adjuster to adjust the cable length. |
Two Ways Installation With the included adhesive hooks and screw hooks, you have two ways to install the VR pulley system depending on whether you want it to permanent or not and what kind of ceiling you have. |
|
|
|
|
|---|---|---|
|
Decrease Cable-Tug The system keeps the cables off the ground which makes it easier for you to bend and get up without the cable getting stuck under your feet. |
Immersive VR Experience Huge difference when the VR cable is suspended behind you instead of laying on the ground and pulling on your headset. A must have for your VR headset! |
Added Ring Hook to Expand Movement Play Area With the included Ring Hook you will have one more option to hold up your VR cables. Please refer to the detailed instructions as shown on our written and video guide. |
ahmed saber almazrouei –
ممتاز
ahmed saber almazrouei –
Omar –
It has all the items in one box, haven’t used it yet but when the official Oculus Quest cable comes out I’ll have it ready!
Omar –
Techie –
Works like a charm. Great packaging ensured everything arrived safely. Recommend this seller and product to all
Techie –